Upload a Google Earth Track to View Ranger
Do you desire to beginning doing longer chance rides and explore new areas? How most hike a specific trail or mountain that is difficult to find? Maybe yous want to go notice a motel in the center of the desert that you spotted while playing around on Google Earth? GPS tracks will give y'all guidance that you need so you lot don't get lost.
I apply a Garmin 62s for navigating on and off the trail. Garmin has since updated the 62s to the Garmin 64s
If you are like me, you play around with Google World and scope out new areas that you want to visit. I commonly pick a destination, and so find what looks similar small clay roads or trails that connect me to them. GE has some pretty amazing imagery these days and you tin even spot the difference between dirt roads and double rails and even singletrack! And so it's time to create some tracks of your own and beginning a new ride, hike, or whatsoever adventure it is you lot want to do.
Drawing GPS tracks using Google Globe
Open Google Earth and navigate the map to an area where you lot want to create a track.
Step 1: Under Places in the left column, you lot're going to want to create a folder for your tracks project. Right click My Places and Add Binder.
Step 2: Cull a proper name and click OK. The binder will appear under My Places.
Step 3: In one case you have a folder created and it'south highlighted, click the Add Path icon 
at the top of the toolbar.
Footstep iv: A window will open and you lot'll enter a proper name for the track. Once you enter a proper noun, don't click OK just yet. You need to continue this window open while y'all brand your track. In gild to come across the map, just elevate and move the window down and out of the way just go out information technology open up.
Step five: Here'south where you volition beginning drawing your rail. Click on a spot on the map where you desire to begin your track. Continue plotting points forth a trail where you want to create a rail. You can hold downwardly the mouse clicker and drag, only the fewer the points/ the easier a track is to manage. If you brand a mistake, the Delete fundamental on your keyboard will delete the last betoken that was plotted as long as the PathWindow is open up. If you closed it and want to go back to edit the track, just right click the track and become to Properties. This will open the window. You can besides move a bespeak past positioning the cursor over the point until it changes color, then click and elevate to move information technology.
Footstep 6: In club to go along drawing a track further on the map, merely use your keyboard arrows to move the map. Don't forget, you tin use the scroller on your mouse to zoom in and out likewise.
Step 7: Once you are washed drawing your rails, you can finally click OK in your track window that you previously moved downwardly and out of the way. Your track will be saved and displayed under "Places" in the track folder. If you want to add together more than to this rail at any time, simply right-click the runway, and so click "Properties", and when the window pops up, motion information technology out of the fashion (but keep it open) and continue to depict on your track.
Stride viii: You can as well add Placemarks or Waypoints to your track file past clicking the "Add Placemark" icon in the toolbar. 
Leave the Placemark window open up later naming information technology, motion information technology bated, and drag your Placemark where you lot desire it go along the map. And then when you are done, proper name it and click OK.
Footstep 9: One time y'all are finished drawing tracks and adding placemarks, y'all'll desire to click the track folder name in order to highlight it, then get up to File> Save> Save Place As. Enter the proper noun and save the file to your estimator. It will save as a .KMZ file. Google Globe uses this file type and information technology can be imported into Basecamp which is what yous'll use to add together the tracks to your GPS device.
Importing Google Globe Tracks Into Garmin BaseCamp
Garmin BaseCamp is a free mapping program that allows you to more thoroughly create and adjust your tracks before importing them into your Garmin device. Information technology works similarly to Google Earth, but has more functions.
Pace 1: Correct click My Collection, and so click New List Folder and name information technology. This will be the name of your entire track file including tracks and waypoints. To demonstrate, I labeled mine "How to Create Tracks". Your rail binder will appear under My Collections.
Stride ii: Next, yous will import your Google Earth tracks. Click your tracks folder to highlight it. So go upward to File > Import into [your tracks binder name]. Select your .KMZ tracks file from your reckoner.
Step iii: Your tracks and waypoints volition at present show upwards on the map in BaseCamp as well every bit listed separately on the bottom left pane. The track color and name may differ slightly than your original. You lot tin can edit this by double clicking the track and selecting the color. You can also rename your waypoint or runway the same mode.
Step 4:I thing that I similar to do, mostly because information technology was required on my older Garmin 60CSX, is to filter each rails downward to 500 points each. At that place is no need to have 20,000+ points for a track. BaseCamp has the ability to filter or simplify your track if there are a ton of plot points that you don't need. Y'all can select how many to filter them down to.
In the lower left pane, right click your track, so click Filter Selected Track. You lot can choose how many the maximum points should be. I always become with 500 because that is the magic number that will work for all Garmins, new and former. My 62s is capable of many more, but if I want to share my tracks with my buddy who has a 60csx, he won't be able to upload them until he filters them down to 500 points.
Step 5:Next, connect your Garmin GPS device to your computer using the USB cable. Your device name will show up under Devices to the left.
Step 6:When you are ready to transfer the tracks and waypoint(southward) to your GPS device, right click the tracks folder or list and click Send To…
Pace vii:A device window will pop up and your Garmin will show up. Some units have the option of internal storage or retention card. Click where you want to store your files on your GPS. Your tracks volition now testify up on your device map. Exist sure to go to the runway managing director and click the box that says "bear witness on map" so you can run across information technology.
Downloads
Google Earth, download it for gratuitous> https://www.google.com/globe/
Garmin BaseCamp, download it for free> http://www.garmin.com/en-United states of america/shop/downloads/basecamp
Many websites such equally GPSXChange offering free GPX files for download. A GPX file is basically the universal GPS file type. It easily imports into Google Earth or BaseCamp. This is an like shooting fish in a barrel manner of planning a trip and using your GPS with a rails that has been explored before.
Question or comments?
Plain this is a very quick overview of the most basic steps to creating a track. You take to kickoff somewhere though. My all-time advice is to kickoff with one simple track. Find something that is off the beaten path on Google Earth, create a track for information technology, upload information technology to your GPS device and become encounter if yous can follow the track in the existent world. One time yous figure that role out, you'll be ready to map out a multi-day adventure.
Still confused? Leave a answer below and I will be glad to aid or answer whatever questions.
Comments
Source: https://livelikepete.com/how-to-create-your-own-gps-tracks-using-google-earth/
0 Response to "Upload a Google Earth Track to View Ranger"
Post a Comment